Airsour Co., Ltd

enLanguage
Rhizome Heat Dryer Machine

Rhizome Heat Dryer Machine

Rhizome heat dryer machine uses heat pump technology to recover heat energy, which can increase the utilization rate of heat energy to more than 90%. Compared with the traditional electric drying equipment, the energy saving effect is remarkable and can greatly reduce the production cost.
Send Inquiry
Description
Technical Parameters

Airsour Rhizome heat dryer machine takes advantage of the reversed Carnot principle, absorbing the heat from around and sending the heat to the materials which will be dried. This kind of dryer is mainly composed of heat pump dryer and drying chamber. This dryer will be controlled by touch screen controller, and the temperature can be adjusted. It has low electric consumption.

 

Unit Model

10PL

12PL

15PV

25PV

50PU

Unit Model

DKXRK-36Ⅱ/LH

DKXRK-44Ⅱ/LH

DKXRK-54Ⅱ/VH

DKXRK-90Ⅱ/VH

DKXRK-180Ⅱ/UH

Power supply specifications

380V/3N~50Hz

380V/3N~50Hz

380V/3N~50Hz

380V/3N~50Hz

380V/3N~50Hz

Rated heating
Dry bulb 20 degrees
Wet bulb 15 degrees

Nominal heat production(KW)

36

46

54

90

180

Nominal heating input power (KW)

8.7

10.9

12.8

21.4

42.8

Nominal current(A)

19.6

21.8

25.6

42.8

85.6

Energy efficiency ratio (W/W)

4.1

4.2

4.2

4.2

4.2

Outlet air temperature

Rated heating return air temperature ℃

50

50

50

50

50

Maximum heating air outlet temperature ℃

75

75

75

75

75

Function

Heating and drying

Heating and drying

Heating and drying

Heating and drying

Heating and drying

Waterproof grade

IPX4

IPX4

IPX4

IPX4

IPX4

Refrigerant (charge quantity)

R134A

2*5

2*5

2*5.2

2*10

4*10

Waterway side

Type

Set exchange

Set exchange

Set exchange

Set exchange

High efficiency tank

Inlet and outlet water pipe size

1.5"\DN40 internal teeth

1.5"\DN40 internal teeth

1"\DN25 internal teeth

2"\DN50 internal teeth

3"\DN80 internal teeth

Circulating water flow rate(m³\h)

7

7

5

15.5

31

Main pipe diameter

PPR50/40 iron pipe

PPR50/40 iron pipe

PPR32/25 iron pipe

63PPR/50 iron pipe

90PPR/80 iron pipe

Water-side pressure loss (kPa)

60

60

50

85

85

Power cord specifications

4 square copper wire

4 square copper wire

4 square copper wire

10 square copper wire

20 square copper wire

Dimension

1424*785*1210

1424*785*1210

1600*920*2000

2030*1100*2120

2300*1300*2390

Net weight of the unit(kg)

305

340

200

730

1500

Gross weight of the unit(kg)

340

380

230

780

1550

Operating noise(dB(A))

<65dB(A)

<65dB(A)

<65dB(A)

<72dB(A)

<78dB(A)

Remarks

1. Rated test conditions: ambient dry and wet bulb temperature is 20℃ /15℃ unit return air 50℃/70%.
2. Use ambient temperature:-25~43℃
3. The size of the inner machine depends on the customer's demand.
4. If the specification changes due to product improvement, the nameplate reference The number shall prevail.

 

Features

 

1. The hot air crosses through the material from bottom up and top down, which increases the contact area between hot air and material and improves the drying speed.

2. The bottom of the inner cavity is fully welded with rounded corners, which makes the machine work without wind phenomenon with the outside world, convenient to clean and ensure no water inside the equipment.

3. Equipped with forced dehumidification function, most of the hot air circulation is used to save energy, and some air is discharged outside the cavity to ensure product quality.

4. Adopting fully enclosed structure to ensure that the materials are not polluted, improve thermal efficiency and work conditions.

5. Adopt unique internal air supply device, which can not only improve the relative speed of materials and hot air, improve drying speed, but also ensure uniform drying.

 

41

 

According to your use needs tailor-made drying energy-saving solutions, energy saving 75% than traditional drying equipment, intelligent management, saving labor costs, quality assurance. By controlling the working condition of the device, the temperature of the hot dry air in the drying chamber is between 20~80℃, which can meet the high quality drying requirements of most heat-sensitive materials; the closed cycle of the drying medium can avoid the contamination of impurities that may be brought to the materials by the exchange of gases with the outside world, which is especially important for food, medicine or biological products. In addition, when the material is sensitive to oxygen in the air (easy oxidation or combustion and explosion), inert medium can be used instead of air as the drying medium to achieve oxygen-free drying.

Hot Tags: rhizome heat dryer machine, China rhizome heat dryer machine manufacturers, suppliers, factory, Heat Pump Dryer, Rhizome Heat Pump Drying Equipment, Flower Heat Pump Dryer, Air Source Heat Pump Sludge Dryer, Rhizome Dryer Heat Pump, Floral Heat Pump Clothes Dryer